Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
If you have plastering and skimming on your list for a property in Rochester, we can help from the first measurements to the final clean-up. For a typical home, plan for 1–3 days per room, plus drying time, though larger or more complex jobs take longer. We cover postcodes ME1, ME4 and ME5 and nearby Chatham, Strood and Gillingham, and every quote we send is fixed for the scope described in it.
- Guide price
- £600–£1,800 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- ME1, ME4 and ME5
- Planning rules
- England
- Local area
- Medway
- Survey
- Free, with a written quote
How much does plastering and skimming cost in Rochester?
In Rochester, guide figures for plastering and skimming sit at £600–£1,800, VAT included. We set them using rates for the South East, currently about 12% above the national guide. The table shows what pushes a project towards either end of the range; your own price is set after a free survey.
| Type of job | What it usually involves | Guide in Rochester |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£550 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £600–£1,800 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £5,600–£13,500 |
Expect these to shape the final quote:
- Total wall and ceiling area to be plastered
- Skim over sound plaster or full re-plaster back to brick
- Removing artex, wallpaper or failed plaster first
- Number of corners, windows and openings to bead
What do you get?
- Survey of walls and ceilings, including tap-testing for hollow plaster
- Floor and furniture protection with dust sheets and masking
- Removal of loose or failed plaster and old wallpaper
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Patching around new sockets, pipes and windows
Building in Rochester
Kent's older buildings include oast houses, weatherboarded cottages, Wealden timber-framed houses and Kentish ragstone walls. Medway towns have long rows of Victorian terraces, Margate and Ramsgate have Regency and Victorian seafronts, and Ashford, Maidstone and Dartford have seen large new estates alongside interwar and post-war housing.
Victorian terraces suit loft rooms and rear extensions; weatherboarded and timber-framed buildings may need cladding repairs and lime work. Newer estate homes often take garage conversions, porches and landscaping.
With that background in mind, here is how we typically handle plastering and skimming for homes in Rochester, from the first visit to the finished result.
Do you need permission in Rochester?
Which rules apply depends on where you live. For Rochester, the answer is England, and the points below reflect that; we verify them with the council before quoting.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
A visit to your home
We begin by looking at the job in person. During the free survey we discuss options, materials and budget for plastering and skimming, and photograph or measure anything the quote needs to reflect.
Written quote
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Plan and prepare
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for plastering and skimming are in place before the first day on site.
Build and hand over
Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.
How we work
Frequently asked questions
When can I paint new plaster?
New plaster can be painted once it is fully dry and evenly pale in colour. The first coat should be a mist coat, which is watered-down emulsion or a specialist primer that soaks into the plaster and seals it. Applying normal emulsion straight on can cause peeling. Vinyl or wipeable paints should be avoided for the first coat, because they stop moisture escaping.
How long does new plaster take to dry?
A skim coat usually dries in a few days in a warm, well-ventilated room, while a full re-plaster can take one to four weeks depending on its thickness and the weather. Plaster turns from dark brown to an even light pink when dry. Keep windows open where possible, but avoid blasting heaters, which can cause cracking. We advise on drying before you decorate.
Can you plaster over artex?
Artex and similar textured ceilings can usually be covered, either by applying a bonding coat and then a skim, or by fixing new plasterboard over the top and skimming that. Some older textured coatings contain hazardous fibres, so they should not be sanded or scraped until a sample has been tested. We can arrange a test before quoting and choose a method that avoids disturbing the coating.
Can I stay at home during the work?
In most cases, yes. Most people can live at home throughout, and we plan the work to keep disruption down by protecting floors, agreeing working hours and keeping access routes clear. Bigger jobs affecting kitchens, bathrooms or heating may mean a short spell with reduced facilities, and we talk this through with you at the survey.
How much will plastering and skimming cost in Rochester?
As a guide, expect to pay £600–£1,800 including VAT for plastering and skimming in Rochester. That range is adjusted for the South East, which runs about 12% above the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.
Near Rochester
Homes across ME1, ME4 and ME5 in Rochester are within our coverage, as are those in Chatham, Strood and Gillingham. If you are just outside these areas, ask anyway, because we work right across the UK.