Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
We offer plastering and skimming across London, and Pinner is one of the places we cover, along with nearby Wealdstone, Ruislip and Harrow. Before anything is agreed we visit, check the existing structure and talk through your options. You then receive a written quote setting out the full scope; for most homes in London it sits within £700–£2,100 including VAT.
- Guide price
- £700–£2,100 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- HA1, HA2, HA4, HA5 and HA6
- Planning rules
- England
- Local area
- Greater London
- Survey
- Free, with a written quote
How much does plastering and skimming cost in Pinner?
Here is how the guide price for plastering and skimming breaks down in Pinner. We start from national figures and adjust for London, which comes out about 30% above the national guide. The resulting range, VAT included, is £700–£2,100, and a survey, at no cost to you, firms it up.
| Type of job | What it usually involves | Guide in Pinner |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £200–£650 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £700–£2,100 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £6,500–£15,500 |
What moves the price up or down:
- Total wall and ceiling area to be plastered
- Skim over sound plaster or full re-plaster back to brick
- Ceiling height, stairwells and access
- Removing artex, wallpaper or failed plaster first
Scope of the work
- Survey of walls and ceilings, including tap-testing for hollow plaster
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
- Patching around new sockets, pipes and windows
- Waste removal and a tidy finish ready for decorating
Local housing and plastering and skimming
London's housing is dominated by Victorian and Edwardian terraces, often in yellow London stock brick, with Georgian terraces in central districts and mansion blocks across many inner areas. Outer boroughs have large belts of interwar semis, and there are extensive post-war council estates. Many houses have been split into flats, and conservation areas are widespread.
Terraces suit side-return extensions and rear dormer loft conversions; interwar semis commonly take hip-to-gable lofts. Shared party walls, restricted parking and conservation rules often shape the plans and the programme.
If your house in Pinner fits one of these patterns, it helps us anticipate what plastering and skimming will involve, though we always confirm the details on site.
Do you need permission in Pinner?
Which rules apply depends on where you live. For Pinner, the answer is England, and the points below reflect that; we verify them with the council before quoting.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
From survey to handover
A visit to your home
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Written quote
We put everything into a written, fixed-price quote: the specification, what's excluded, staged payments and the expected time on site. Take whatever time you need to decide; there's no pressure to commit.
Dates and permissions
Preparation matters as much as the build. We agree access, parking and working hours with you, order materials in good time, and confirm any permissions so the job isn't held up once it starts.
Build and hand over
On site, the agreed plan is followed and any change is put in writing first. At completion we do a final clean, go through the snagging list with you and leave you with the relevant documents.
What you can expect from us
Frequently asked questions
Do you cover Wealdstone, Ruislip and Harrow?
Yes. As well as Pinner, we cover Wealdstone, Ruislip and Harrow and the rest of London. Our coverage is UK-wide, so the process is the same wherever you are: a free site survey, a quote in writing that fixes the price for the agreed scope, and one point of contact while the work is planned and carried out.
How messy is plastering?
Plastering is wet work, so some mess is unavoidable, but good protection keeps it under control. We cover floors with dust sheets, mask sockets, switches and skirting, and move or cover furniture. Removing old plaster creates the most dust, so we seal doorways and keep the area ventilated. At the end, we clear waste and leave the room tidy and ready for decorating.
How long does new plaster take to dry?
A skim coat usually dries in a few days in a warm, well-ventilated room, while a full re-plaster can take one to four weeks depending on its thickness and the weather. Plaster turns from dark brown to an even light pink when dry. Keep windows open where possible, but avoid blasting heaters, which can cause cracking. We advise on drying before you decorate.
Which postcodes in Pinner do you cover?
We cover HA1, HA2, HA4 and HA5, along with the rest of London. If your postcode is not listed, get in touch anyway: our coverage is UK-wide, and we can usually arrange a survey wherever you live. Enter your postcode in the guide-price tool or contact form and we will confirm.
When can I paint new plaster?
New plaster can be painted once it is fully dry and evenly pale in colour. The first coat should be a mist coat, which is watered-down emulsion or a specialist primer that soaks into the plaster and seals it. Applying normal emulsion straight on can cause peeling. Vinyl or wipeable paints should be avoided for the first coat, because they stop moisture escaping.
Nearby towns
Homes across HA1, HA2, HA4 and HA5 in Pinner are within our coverage, as are those in Wealdstone, Ruislip and Harrow. If you are just outside these areas, ask anyway, because we work right across the UK.