Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
Addresses across RM1, RM2, RM5 and RM7 fall within our coverage for plastering and skimming, so if your home is in Romford we can arrange a survey on a day that works for you. We inspect the existing building, discuss materials and layout, and then price the agreed specification in writing. Expect a guide range of £700–£2,100 including VAT before that visit.
- Guide price
- £700–£2,100 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- RM1, RM2, RM5, RM7 and RM11
- Planning rules
- England
- Local area
- Greater London
- Survey
- Free, with a written quote
Plastering and skimming prices in Romford
No two jobs cost exactly the same, but the ranges below give a fair picture of plastering and skimming in Romford. Pricing for London runs about 30% above the national guide, and the overall guide is £700–£2,100 with VAT included. We'll confirm your figure after surveying the property for free.
| Type of job | What it usually involves | Guide in Romford |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £200–£650 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £700–£2,100 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £6,500–£15,500 |
The main things that change the figure:
- Total wall and ceiling area to be plastered
- Ceiling height, stairwells and access
- Removing artex, wallpaper or failed plaster first
- Number of corners, windows and openings to bead
What do you get?
- Floor and furniture protection with dust sheets and masking
- Removal of loose or failed plaster and old wallpaper
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
- Waste removal and a tidy finish ready for decorating
Homes in London
London's housing is dominated by Victorian and Edwardian terraces, often in yellow London stock brick, with Georgian terraces in central districts and mansion blocks across many inner areas. Outer boroughs have large belts of interwar semis, and there are extensive post-war council estates. Many houses have been split into flats, and conservation areas are widespread.
Terraces suit side-return extensions and rear dormer loft conversions; interwar semis commonly take hip-to-gable lofts. Shared party walls, restricted parking and conservation rules often shape the plans and the programme.
Whatever era your Romford home dates from, we plan plastering and skimming around how it is actually built rather than a one-size-fits-all specification.
Do you need permission in Romford?
England, Wales, Scotland and Northern Ireland each handle planning a little differently. Romford comes under England, covered below, and we raise any questions with the council before your quote is finalised.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
We look at the job
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Your fixed price
The quote arrives in writing, not over the phone. It covers the full scope, the finishes you've chosen, any exclusions and the payment schedule, with a fixed price tied to that specification.
Booking the work
With the quote agreed, we book the work in and handle preparation: permissions where needed, building control notifications, material orders and access arrangements for your Romford property.
Build and hand over
The job proceeds in the order set out in the programme, with dust and debris kept under control. Finally we tidy away, inspect the work together and pass the finished project over to you with its paperwork.
Why homeowners choose us
Common questions
How long does new plaster take to dry?
A skim coat usually dries in a few days in a warm, well-ventilated room, while a full re-plaster can take one to four weeks depending on its thickness and the weather. Plaster turns from dark brown to an even light pink when dry. Keep windows open where possible, but avoid blasting heaters, which can cause cracking. We advise on drying before you decorate.
Should older houses be plastered with lime?
Older homes with solid walls and no damp-proof course are often better with lime plaster, because it lets moisture move through the wall and evaporate. Modern gypsum plaster can trap moisture in these walls, which can cause damp patches and blown plaster. Lime takes longer to apply and dry, so it costs more. We check your wall construction before recommending a material.
Can you plaster over artex?
Artex and similar textured ceilings can usually be covered, either by applying a bonding coat and then a skim, or by fixing new plasterboard over the top and skimming that. Some older textured coatings contain hazardous fibres, so they should not be sanded or scraped until a sample has been tested. We can arrange a test before quoting and choose a method that avoids disturbing the coating.
How long will plastering and skimming take?
On a typical home, allow 1–3 days per room, plus drying time. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
Near Romford
Live in Romford? Our coverage takes in the RM1, RM2, RM5 and RM7 postcode areas and reaches out to Hornchurch, Dagenham and Becontree, so homes on the outskirts and in the next town along are included.