Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
Across Shropshire, people look into plastering and skimming to replace something worn out, to make the house work better for them, or to get it ready for a sale. We cover Telford, Shrewsbury, Wellington and Oswestry and the smaller towns around them, working to the rules that apply in England. Expect a guide of £550–£1,550, VAT included, in the West Midlands, and every quote follows a free visit.
- Guide price
- £550–£1,550 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Planning rules
- England
- Price level
- About 2% below the national guide
- Towns listed
- 4
- Survey
- Free, with a written quote
Plastering and skimming prices in Shropshire
Below is a breakdown of typical costs for plastering and skimming in Shropshire. Because rates in the West Midlands are about 2% below the national guide, the overall guide comes to £550–£1,550, including VAT. Size, materials and access move the figure, and a free-of-charge survey settles it.
| Type of job | What it usually involves | Guide in Shropshire |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£500 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £550–£1,550 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £4,900–£12,000 |
What moves the price up or down:
- Total wall and ceiling area to be plastered
- Skim over sound plaster or full re-plaster back to brick
- Ceiling height, stairwells and access
- Number of corners, windows and openings to bead
What’s included?
- Survey of walls and ceilings, including tap-testing for hollow plaster
- Floor and furniture protection with dust sheets and masking
- Removal of loose or failed plaster and old wallpaper
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
Housing across Shropshire
Shrewsbury and Ludlow are known for black-and-white timber-framed buildings alongside Georgian brick, and red sandstone is common in the north of the county. Telford was built as a new town from the late 1960s with large planned estates, and market towns such as Oswestry, Bridgnorth and Whitchurch mix historic centres with interwar and newer housing.
Timber-framed and stone buildings often need lime plaster, breathable finishes and roof repairs. Telford homes commonly suit extensions, window replacement and roofline or cladding renewal.
The Severn floods regularly in Shrewsbury and downstream, and the hills along the Welsh border are exposed to wind and heavier rain.
Do you need permission in Shropshire?
As Shropshire is in England, read the following with that system of planning and building control in mind. We check what applies to your house with the council before you receive a quote.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
We look at the job
First, someone visits your home in Shropshire to see the space, take measurements and note anything that could affect the work, such as access or the condition of what is there. There is no charge for this visit.
Quote in writing
The quote arrives in writing, not over the phone. It covers the full scope, the finishes you've chosen, any exclusions and the payment schedule, with a fixed price tied to that specification.
Getting ready
Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.
The work itself
Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.
How we work
Questions about plastering and skimming in Shropshire
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
How long does new plaster take to dry?
A skim coat usually dries in a few days in a warm, well-ventilated room, while a full re-plaster can take one to four weeks depending on its thickness and the weather. Plaster turns from dark brown to an even light pink when dry. Keep windows open where possible, but avoid blasting heaters, which can cause cracking. We advise on drying before you decorate.
Why is my plaster cracking?
Fine cracks in new plaster are usually shrinkage cracks from drying too fast and are easily filled before decorating. Cracks along plasterboard joints often mean missing tape or movement in the boards. Larger or diagonal cracks over doors and windows can point to structural movement and should be looked at before re-plastering. We assess cracks during the survey and explain the likely cause.
Can I stay at home during the work?
In most cases, yes. Most people can live at home throughout, and we plan the work to keep disruption down by protecting floors, agreeing working hours and keeping access routes clear. Bigger jobs affecting kitchens, bathrooms or heating may mean a short spell with reduced facilities, and we talk this through with you at the survey.
When can I paint new plaster?
New plaster can be painted once it is fully dry and evenly pale in colour. The first coat should be a mist coat, which is watered-down emulsion or a specialist primer that soaks into the plaster and seals it. Applying normal emulsion straight on can cause peeling. Vinyl or wipeable paints should be avoided for the first coat, because they stop moisture escaping.
Towns in Shropshire
Our coverage for plastering and skimming in Shropshire includes the towns listed here. Each page explains guide costs, typical timings and the neighbouring places we also serve.