Bifold doors are glazed panels that fold and stack to one side to open up a wide gap, while sliding doors glide past each other on tracks; both connect a living space to the garden and bring in more daylight.
For a homeowner in Poole, planning bifold or sliding doors tends to begin with two questions: what will it cost, and how disruptive will it be? Our guide range is £3,100–£8,200 including VAT, and a typical job runs to 1–2 days to fit into a ready opening. Both numbers firm up once we have seen the property, measured up and agreed exactly what is included.
- Guide price
- £3,100–£8,200 inc VAT
- Time on site
- 1–2 days to fit into a ready opening
- Postcodes
- BH14, BH15 and BH17
- Planning rules
- England
- Local area
- Dorset
- Survey
- Free, with a written quote
What should you budget for bifold or sliding doors in Poole?
Use the table to gauge the cost of bifold or sliding doors in Poole before we visit. Figures include VAT and are scaled for the South West, coming out about 2% above the national guide, which gives £3,100–£8,200 overall. After a free survey, you receive a fixed written price.
| Type of job | What it usually involves | Guide in Poole |
|---|---|---|
| uPVC sliding or French doors | Standard uPVC doors fitted into an existing opening of up to about 2m. | £1,550–£3,100 |
| 3m aluminium bifold | A three-panel aluminium bifold in a standard colour, fitted into a ready opening. | £3,600–£7,100 |
| Wide bifold or slimline slider | Openings of 4m or more and slim-frame doors, often with a new steel above. | £7,100–£14,500 |
Your price depends mostly on:
- Width and height of the opening and number of panels
- Frame material: uPVC, standard aluminium or slimline aluminium
- Glazing upgrades such as solar control or triple glazing
- Threshold type, colour choice and built-in blinds
What do you get?
- Made-to-measure bifold, sliding or French doors in your chosen colour
- Toughened double glazing as standard, with solar control options
- Removal of existing doors or windows and disposal of waste
- Level or low threshold options to suit your patio
- Weather seals, cills and internal trims finished neatly
- Building regulations sign-off arranged for the new doors
What are homes like around Poole?
Dorset's older villages use Purbeck and Portland stone, chalk and flint, and thatch on cob or brick cottages. Bournemouth and Poole have Victorian and Edwardian villas, large interwar suburbs and plenty of bungalows and flats, while Weymouth, Dorchester and Bridport mix Georgian and Victorian streets with newer estates.
Stone and thatched cottages may need lime repairs and conservation-area window choices. Bungalows around Bournemouth and Poole commonly suit loft conversions, and coastal homes often need roofline, rendering and window renewal.
These patterns matter for bifold or sliding doors: older walls, roofs and floors in Poole can need different materials or extra preparation compared with newer homes.
Planning and building rules in Poole
Poole is in England, so the planning and building rules set out below are the ones that apply. We confirm the details with the council before we quote.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
We look at the job
We begin by looking at the job in person. During the free survey we discuss options, materials and budget for bifold or sliding doors, and photograph or measure anything the quote needs to reflect.
Price and scope agreed
After the survey we send a quote for bifold or sliding doors that fixes the price for the scope we've agreed. If you want to change materials or scope, we revise it in writing before anything is booked.
Getting ready
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for bifold or sliding doors are in place before the first day on site.
The work itself
On site, the agreed plan is followed and any change is put in writing first. At completion we do a final clean, go through the snagging list with you and leave you with the relevant documents.
How we work
Common questions
Can you fit bifold doors where I have a window now?
Bifold doors can usually replace a window by cutting the wall down to floor level and, if the opening is being widened, fitting a new lintel or steel beam. A structural engineer sizes the beam, and building control approval is needed. Radiators, pipes and cables under the window may need moving. We check all of this at the survey and include it in a single written quote.
Do I need planning permission in Poole?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Poole is in England, so England's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
How long will bifold or sliding doors take?
On a typical home, allow 1–2 days to fit into a ready opening. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.
How much do bifold doors cost?
Bifold doors cost £3,100–£8,200 for a typical 3m opening, supplied and fitted. As a rough guide, allow around £900–£2,000 per metre of width plus the fixed costs of fitting, depending on frame material and glass. uPVC sits at the lower end and slimline aluminium at the top. Widening the opening with a new steel adds to the price. We confirm a fixed figure after measuring.
Can I have a level threshold?
A level threshold means the door track sits flush with the floor, so there is no step between inside and out. Most aluminium bifolds and sliders can be fitted this way, but the outside paving must sit just below the track with a drainage channel to keep rain out. Rebated thresholds give stronger weather protection with only a small step. We check floor and patio levels before recommending either.
Also covering areas around Poole
From BH14, BH15 and BH17 to the edges of Poole and on into Bournemouth, Christchurch and New Milton, we can arrange a site visit and a written quote for your project, planned around dates that work for you.