England · Building Works

Brickwork and repointing in Kent

Guide price £2,800–£6,700 including VAT across Kent, with a free site survey and a written fixed price.

Close-up of freshly repointed red brickwork

Free survey in Kent

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

Repointing is raking out old, crumbling mortar from between bricks and replacing it with fresh mortar, sealing the joints against rain and protecting the wall; brickwork repairs replace spalled or cracked bricks and rebuild damaged sections.

Homes across Kent vary a great deal, so we price brickwork and repointing only after seeing the property. Our coverage takes in Maidstone, Gillingham, Chatham and Tunbridge Wells and the surrounding districts. As a guide, expect £2,800–£6,700 including VAT in the South East; the final figure depends on size, materials and access. Any permissions are checked against the rules for England before we quote.

Guide price
£2,800–£6,700 inc VAT
Time on site
3–10 days for a typical house
Planning rules
England
Price level
About 12% above the national guide
Towns listed
23
Survey
Free, with a written quote

Brickwork and repointing prices in Kent

No two jobs cost exactly the same, but the ranges below give a fair picture of brickwork and repointing in Kent. Pricing for the South East runs about 12% above the national guide, and the overall guide is £2,800–£6,700 with VAT included. We'll confirm your figure after surveying the property for free.

Type of jobWhat it usually involvesGuide in Kent
Chimney or small areaRepointing a chimney stack, gable or single wall, including access.£650–£2,000
Typical semi-detachedRepointing the main elevations of a 3-bed semi, including scaffolding.£2,800–£6,700
Detached or lime workLarger houses, or period homes repointed in lime with brick repairs.£5,600–£11,000

Your price depends mostly on:

  • Wall area to repoint and the height of the house
  • Mortar type: cement or lime, and joint style
  • Number of bricks to replace and how well they match
  • Scaffolding and access, including chimneys

Scope of the work

  • Scaffolding or access towers where needed
  • Raking out old mortar to the correct depth
  • Mortar mixed to suit the wall, in lime or cement
  • Colour and joint style matched as closely as possible
  • Replacement of spalled or cracked bricks
  • Waste removal and a tidy site
Full elevation repointingRepointing an entire wall or the whole house for a uniform, weathertight finish.
Lime repointingBreathable lime mortar for older, solid-walled homes built with soft bricks.
Brick replacementCutting out spalled or cracked bricks and fitting matching reclaimed or new bricks.
Garden walls and piersNew or rebuilt garden walls, piers and boundary walls on proper foundations.

Housing across Kent

Kent's older buildings include oast houses, weatherboarded cottages, Wealden timber-framed houses and Kentish ragstone walls. Medway towns have long rows of Victorian terraces, Margate and Ramsgate have Regency and Victorian seafronts, and Ashford, Maidstone and Dartford have seen large new estates alongside interwar and post-war housing.

Victorian terraces suit loft rooms and rear extensions; weatherboarded and timber-framed buildings may need cladding repairs and lime work. Newer estate homes often take garage conversions, porches and landscaping.

One of England's sunnier, drier counties, but Thanet and the coast are windy, and Weald and London Clay soils can shrink in summer.

Planning and building rules in Kent

Which rules apply depends on where you live. For Kent, the answer is England, and the points below reflect that; we verify them with the council before quoting.

Repointing and repairing brickwork with matching materials is maintenance, so it does not need planning permission in England. On a listed building, work that affects its character, including a change of mortar or brick, may need listed building consent.

Building Regulations do not normally apply to repointing or brick repairs, but rebuilding a wall, chimney or structural section can need building control involvement.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

From survey to handover

  1. We look at the job

    A free survey comes first. It gives us what we need to price brickwork and repointing properly, including dimensions, existing materials and access for deliveries, and gives you the chance to ask anything you like.

  2. Written quote

    You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for brickwork and repointing.

  3. Booking the work

    Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.

  4. Finish and handover

    Our trades complete brickwork and repointing while your point of contact keeps you updated. When everything is finished, we clear the site, take away waste and go through the result with you before handover.

How we work

Free site surveyWe visit your home to measure up and discuss the work at no cost, and there is no obligation to go ahead once you have our price.
Guide prices shown upfrontYou can see typical price ranges, including VAT, before you contact us, so you can judge whether a project fits your budget.
Permissions checked firstWe check whether planning permission or building control approval is needed for your property, and handle applications and notices where they apply.
Clear staged paymentsThe quote sets out when each payment falls due, linked to stages of the work, so you know in advance what is owed and when.

Frequently asked questions

How do I know if my house needs repointing?

A house needs repointing when the mortar between bricks is crumbling, recessed well behind the brick face, cracked or missing. You may be able to scrape it out with a key. Damp patches inside, especially on exposed walls, and plants growing in joints are other signs. Patches of failed mortar can be repointed on their own, but widespread decay usually means a full elevation.

Who do I deal with during the job?

One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.

Can I stay at home during the work?

In most cases, yes. Most people can live at home throughout, and we plan the work to keep disruption down by protecting floors, agreeing working hours and keeping access routes clear. Bigger jobs affecting kitchens, bathrooms or heating may mean a short spell with reduced facilities, and we talk this through with you at the survey.

How much does repointing a house cost?

Repointing a typical 3-bed semi costs £2,800–£6,700, including scaffolding. As a guide, allow roughly £25–£55 per square metre of wall plus fixed costs for access and set-up. Chimney stacks, lime mortar and brick replacement add cost, while repointing a single elevation costs less. We confirm a fixed price after inspecting your walls.

Is repointing messy or noisy?

Raking out old mortar is noisy and dusty, especially when power tools are used on hard mortar. We sheet scaffolding to contain dust, keep windows closed nearby and clear up at the end of each day. The noisy phase moves around the house elevation by elevation. Inside, you may notice some dust on windowsills, so it helps to keep windows shut.

Towns in Kent

We offer brickwork and repointing in each of the towns below, all within Kent. Select yours for guide prices, postcodes covered and nearby places.

Ready for a written price?

Arrange a visit to your home in Kent, at no charge. We'll measure up for brickwork and repointing, talk through the options and follow up with a fixed price in writing.

Call freeFree quote