Perth and Kinross · Landscaping & Outdoor Spaces

Fencing and gates in Perth

Local guide: £1,150–£2,900 inc VAT. Planning notes for Scotland, a free survey and one point of contact.

New close-board timber fence with concrete posts and a side gate

Free survey in Perth

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

Fencing installation is setting fence posts into the ground, usually in concrete, and fixing panels or boards between them to mark a boundary, add privacy or keep children and pets in, with gates fitted where access is needed.

If you have new fencing and gates on your list for a property in Perth, we can help from the first measurements to the final clean-up. For a typical home, plan for 1–3 days for a typical garden, though larger or more complex jobs take longer. We cover postcodes PH1 and PH2 and nearby Auchterarder, Blairgowrie and Crieff, and every quote we send is fixed for the scope described in it.

Guide price
£1,150–£2,900 inc VAT
Time on site
1–3 days for a typical garden
Postcodes
PH1 and PH2
Planning rules
Scotland
Local area
Perth and Kinross
Survey
Free, with a written quote

How much do new fencing and gates cost in Perth?

What will new fencing and gates cost in Perth? Our guide range is £1,150–£2,900 including VAT. That figure is adjusted for Scotland, about 4% below the national guide, and is intended for planning a budget. A firm written price for your chosen specification follows a free survey at your home.

Type of jobWhat it usually involvesGuide in Perth
Repairs or a short runReplacing a few panels and posts, or a short run of up to about 6m.£300–£850
Typical garden boundaryAbout 20m of panel or closeboard fencing with concrete posts and gravel boards.£1,150–£2,900
Composite or long runs with gatesComposite or premium fencing, longer runs, or a driveway gate.£2,900–£6,700

The main things that change the figure:

  • Fence style and material: panels, closeboard or composite
  • Post type: concrete, timber or aluminium
  • Ground conditions, slopes and removal of the old fence
  • Number, size and type of gates

Scope of the work

  • Measured survey of each fence run, levels and slopes
  • Removal and disposal of the old fence and posts
  • Concrete or timber posts set in concrete
  • Concrete or timber gravel boards to keep panels off the soil
  • Gates hung with hinges, latches and locks
  • Site cleared and waste removed
Lap or overlap panelsLower-cost panels for marking boundaries, quick to install.
Closeboard or featheredgeVertical boards on rails, strong and solid for privacy and exposed sites.
Slatted or hit-and-missHorizontal or alternating boards for a modern look that lets air through.
Composite fencingLow-maintenance boards in aluminium or concrete posts that do not rot or need painting.

What are homes like around Perth?

Perth has Georgian terraces and Victorian sandstone villas, Highland Perthshire towns such as Pitlochry and Aberfeldy have stone villas and cottages, and Kinross and Crieff mix older stone housing with post-war and modern estates. Slate roofs and harled finishes are common in rural areas.

Sandstone villas in Perth and Highland Perthshire often need repointing and slate roof repairs, and many sit in conservation areas. Semis and newer homes commonly take extensions, garage conversions and garden landscaping.

For new fencing and gates in Perth, this means checking things like wall construction, roof structure and existing services before we put a figure on paper.

Do you need permission in Perth?

Homes in Perth come under the regulations for Scotland, summarised below. We don't rely on general rules alone: we confirm the position for your address with the council before a quote goes out.

In Scotland, gates, fences and walls up to 2 m high are usually permitted development, with a 1 m limit in front of the house or next to a road.

A building warrant is not needed for ordinary garden fences.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

The four stages

  1. We look at the job

    First, someone visits your home in Perth to see the space, take measurements and note anything that could affect the work, such as access or the condition of what is there. There is no charge for this visit.

  2. Written quote

    You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for new fencing and gates.

  3. Dates and permissions

    Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.

  4. The work itself

    Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.

Why homeowners choose us

Guide prices shown upfrontYou can see typical price ranges, including VAT, before you contact us, so you can judge whether a project fits your budget.
Permissions checked firstWe check whether planning permission or building control approval is needed for your property, and handle applications and notices where they apply.
Changes agreed in writingIf something needs to change once work is under way, we explain why and confirm the cost or saving in writing before carrying on.
Realistic timetablesWe give you an honest estimate of time on site at the quote stage and keep you informed if anything affects the programme once work starts.

Common questions

Can I stay at home during the work?

In most cases, yes. Most people can live at home throughout, and we plan the work to keep disruption down by protecting floors, agreeing working hours and keeping access routes clear. Bigger jobs affecting kitchens, bathrooms or heating may mean a short spell with reduced facilities, and we talk this through with you at the survey.

Who owns the fence between me and my neighbour?

Fence ownership is usually shown on the title plan or deeds, sometimes with a T mark on the side of the owner. If it is unclear, it may be shared. Even on your own boundary, it is sensible to talk to neighbours before replacing a fence, agree access and confirm the line. We fit the fence on the line you confirm and can face the good side outwards if you wish.

How much does a new fence cost?

About 20m of new panel or closeboard fencing with concrete posts costs £1,150–£2,900, including removal of the old fence. As a guide, allow roughly £55–£130 per metre plus a small fixed cost for removal and waste. Lap panels sit at the lower end, while closeboard, slatted and composite fencing cost more. Gates, slopes and hard ground add to the price. We confirm a fixed price after measuring.

What kind of gate do I need?

The right gate depends on its job. A side gate for access to the back garden is usually timber or metal, around 0.9m to 1m wide, with a secure lock. Driveway gates are wider, often in pairs, and need strong posts. Composite and metal gates resist warping. We measure the opening, check posts and suggest hinges, latches and locks for security.

Do you cover Auchterarder, Blairgowrie and Crieff?

Yes. As well as Perth, we cover Auchterarder, Blairgowrie and Crieff and the rest of Perth and Kinross. Our coverage is UK-wide, so the process is the same wherever you are: a free site survey, a quote in writing that fixes the price for the agreed scope, and one point of contact while the work is planned and carried out.

Near Perth

We cover every part of Perth, including PH1 and PH2, and nearby Auchterarder, Blairgowrie and Crieff. Wherever you are within that patch, the survey is free and the quote comes to you in writing.

Planning new fencing and gates in Perth?

Arrange a visit to your home in Perth, at no charge. We'll measure up for new fencing and gates, talk through the options and follow up with a fixed price in writing.

Call freeFree quote