Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
If you are planning plastering and skimming anywhere in Derbyshire, including Derby, Chesterfield, Long Eaton and Ilkeston, we can visit, measure up and talk through the options. The planning and building regulations we work to are those for England, and we check them for your address before quoting. Prices remain guide figures for the East Midlands, at £550–£1,550 including VAT, until the survey is done.
- Guide price
- £550–£1,550 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Planning rules
- England
- Price level
- About 4% below the national guide
- Towns listed
- 12
- Survey
- Free, with a written quote
How much does plastering and skimming cost in Derbyshire?
The table below shows guide prices for plastering and skimming in Derbyshire. They are based on rates in the East Midlands, which run about 4% below the national guide, giving an overall range of £550–£1,550. All figures include VAT and are firmed up after a free site survey.
| Type of job | What it usually involves | Guide in Derbyshire |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£500 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £550–£1,550 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £4,800–£11,500 |
Your price depends mostly on:
- Total wall and ceiling area to be plastered
- Skim over sound plaster or full re-plaster back to brick
- Removing artex, wallpaper or failed plaster first
- Number of corners, windows and openings to bead
Scope of the work
- Survey of walls and ceilings, including tap-testing for hollow plaster
- Removal of loose or failed plaster and old wallpaper
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Patching around new sockets, pipes and windows
- Waste removal and a tidy finish ready for decorating
Homes in Derbyshire
Derby has wide areas of Victorian red-brick terraces and interwar semis, while Peak District villages use gritstone and limestone under stone-slate or Welsh slate roofs. Former mining towns in the north-east of the county have brick terraces and post-war housing built for mining communities, and modern estates have grown around Derby, Chesterfield and the M1 corridor.
Brick terraces frequently suit loft conversions and rear extensions, and many need repointing. Stone properties in the Peak may call for lime work and planning-sensitive windows, while interwar and estate homes commonly take side extensions and garage conversions.
The High Peak gets heavy rain, snow and frequent frost, while the lower Trent valley is milder; old mine workings can also affect ground conditions in places.
Planning and building rules in Derbyshire
Planning law differs across the UK. For a home in Derbyshire, it is the England rules below that count, and we check them with the council ahead of any quote.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
Survey and measure
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Written quote
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Dates and permissions
We handle the paperwork side: checking whether planning permission or building control approval is needed, submitting applications where they are, and scheduling the trades and materials around your dates.
Finish and handover
Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.
How we work
Questions about plastering and skimming in Derbyshire
Why is my plaster cracking?
Fine cracks in new plaster are usually shrinkage cracks from drying too fast and are easily filled before decorating. Cracks along plasterboard joints often mean missing tape or movement in the boards. Larger or diagonal cracks over doors and windows can point to structural movement and should be looked at before re-plastering. We assess cracks during the survey and explain the likely cause.
How much will plastering and skimming cost in Derbyshire?
As a guide, expect to pay £550–£1,550 including VAT for plastering and skimming in Derbyshire. That range is adjusted for the East Midlands, which runs about 4% below the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.
Should older houses be plastered with lime?
Older homes with solid walls and no damp-proof course are often better with lime plaster, because it lets moisture move through the wall and evaporate. Modern gypsum plaster can trap moisture in these walls, which can cause damp patches and blown plaster. Lime takes longer to apply and dry, so it costs more. We check your wall construction before recommending a material.
How long does new plaster take to dry?
A skim coat usually dries in a few days in a warm, well-ventilated room, while a full re-plaster can take one to four weeks depending on its thickness and the weather. Plaster turns from dark brown to an even light pink when dry. Keep windows open where possible, but avoid blasting heaters, which can cause cracking. We advise on drying before you decorate.
Can you combine plastering and skimming with other work?
Yes. Because we manage several trades under one contract, we can plan plastering and skimming alongside other work on your Derbyshire home, such as new windows with rendering, or a kitchen refit with an extension. Combining jobs can reduce repeat set-up such as scaffolding, skips and access, and every element is listed and priced in the same written quote.
Towns in Derbyshire
Below is our list of Derbyshire towns for plastering and skimming. If yours isn't shown, we may still cover it, so it is worth asking us directly.