Wales · Building Works

Wall removal and steel beams in Dyfed

Guide price £2,800–£7,400 including VAT across Dyfed, with a free site survey and a written fixed price.

Open-plan kitchen dining room after an internal wall was removed

Free survey in Dyfed

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

Wall removal is taking out an internal wall to open up rooms; where the wall is load-bearing, a steel beam sized by a structural engineer is installed on padstones to carry the weight above, with the work approved by building control.

We offer removing a wall throughout Dyfed, from Llanelli, Ammanford, Aberystwyth and Carmarthen to the smaller places in between. Each project starts with a free survey at your home and ends with a written figure, fixed for the work you choose. Because Dyfed is in Wales, we work to the planning system and building standards used there, and guide prices for Wales run at £2,800–£7,400 including VAT.

Guide price
£2,800–£7,400 inc VAT
Time on site
1–3 weeks including making good
Planning rules
Wales
Price level
About 8% below the national guide
Towns listed
4
Survey
Free, with a written quote

Wall removal and steel beams prices in Dyfed

Below is a breakdown of typical costs for removing a wall in Dyfed. Because rates in Wales are about 8% below the national guide, the overall guide comes to £2,800–£7,400, including VAT. Size, materials and access move the figure, and a free-of-charge survey settles it.

Type of jobWhat it usually involvesGuide in Dyfed
Non-load-bearing wallRemoving a stud or block partition and making good walls, ceiling and floor.£750–£1,850
Load-bearing wall up to 4mA typical kitchen-diner knock-through with one steel beam, calculations and building control.£2,800–£7,400
Wide or complex openingOpenings over 4m, posts, flush beams or chimney breast removal.£7,400–£14,500

What moves the price up or down:

  • Opening width and the load the wall carries
  • Beam size, posts, flush fixing and padstone details
  • Services in the wall that need rerouting
  • Floor and ceiling repairs where the wall stood

What’s included?

  • Survey to establish what the wall supports and where loads go
  • Structural engineer's calculations and beam specification
  • Temporary propping and dust protection during the work
  • Wall taken down and waste removed from site
  • Steel beam installed on padstones and packed tight
  • Beam boarded or treated for fire protection
Load-bearing wall with steelA structural wall replaced by a steel beam and padstones to engineer's design.
Steel with postsWide openings that need steel posts or columns for support at intermediate points.
Chimney breast removalRemoving a chimney breast with support for the stack above by steel or brackets.
Flush or hidden beamSteel set within the ceiling depth so no downstand is visible, where joists allow.

Housing across Dyfed

Dyfed covers Carmarthenshire, Ceredigion and Pembrokeshire. Stone cottages and farmhouses under slate roofs are common, often rendered or colour-washed, as in Tenby's brightly painted terraces. Llanelli has Victorian industrial terraces, Aberystwyth and Carmarthen have Georgian and Victorian centres, and bungalows and newer estates surround most towns.

Stone homes often need lime render, repointing and roof slating repairs. Terraces suit loft conversions and extensions, and rural bungalows commonly take extensions, porches and driveways.

Atlantic weather brings strong winds, driving rain and salt to the coast, so exposure ratings matter when specifying render and pointing.

Do you need permission in Dyfed?

Dyfed is in Wales, so the planning and building rules set out below are the ones that apply. We confirm the details with the council before we quote.

Removing an internal wall does not need planning permission in Wales unless the building is listed.

Load-bearing walls need Building Regulations approval and structural calculations; the Party Wall etc. Act 1996 applies to shared walls.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

How does the job run?

  1. Survey and measure

    We arrange a free site survey on a date convenient to you. We measure up, look at the existing structure and access, and discuss your plans for removing a wall so the price reflects your home.

  2. Written quote

    You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for removing a wall.

  3. Dates and permissions

    With the quote agreed, we book the work in and handle preparation: permissions where needed, building control notifications, material orders and access arrangements for your Dyfed property.

  4. On site to finish

    Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.

What you can expect from us

Written, fixed-price quotesYour quote states one fixed price for the work as we have specified it together, with inclusions and exclusions listed so there are no grey areas.
Changes agreed in writingIf something needs to change once work is under way, we explain why and confirm the cost or saving in writing before carrying on.
Realistic timetablesWe give you an honest estimate of time on site at the quote stage and keep you informed if anything affects the programme once work starts.
A proper handoverAt the end we clear the site, show you round the finished work and pass on documents like a building control completion certificate.

Frequently asked questions

How disruptive is removing a wall?

Removing a wall is dusty and noisy, but the most disruptive part is short, usually one to three days for propping, demolition and installing the steel. We seal doorways with dust screens, protect floors and keep a safe route through the house. Making good, plastering and floor repairs follow over the next week or two. Most people stay at home throughout.

How do I know if a wall is load-bearing?

A wall is load-bearing if it carries weight from above, such as floor joists, another wall, the roof or a chimney. Clues include joists running across the wall rather than alongside it, and walls lined up with walls on the floor above. Brick or block walls are often structural but not always. We check from above and below during the survey, and an engineer confirms the design.

Which postcodes in Dyfed do you cover?

We cover SA15, SA18, SY23 and SA31, along with the rest of Dyfed. If your postcode is not listed, get in touch anyway: our coverage is UK-wide, and we can usually arrange a survey wherever you live. Enter your postcode in the guide-price tool or contact form and we will confirm.

Do I need building regulations approval to remove a wall?

Removing a load-bearing wall needs building regulations approval anywhere in the UK, and in Scotland a building warrant. A structural engineer calculates the beam and supports, and building control inspects the work. Removing a non-structural wall may still need approval if it affects fire escape routes, such as opening a hallway into a living room. We handle the applications and inspections.

Who do I deal with during the job?

One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.

Towns in Dyfed

We offer removing a wall in each of the towns below, all within Dyfed. Select yours for guide prices, postcodes covered and nearby places.

Planning removing a wall in Dyfed?

Start with a free site survey for removing a wall in Dyfed. You'll receive a written quote showing exactly what is included and how the payments are staged.

Call freeFree quote